SIM800A GSM/GPRS Module Development Board ส่ง SMS โทร เข้า-ออก กับ Arduino
Sim โมดูล SIM800L Module สำหรับใช้ในการรับส่ง SMS โทรศัพท์หาเบอร์ที่ต้องการ เชื่อมต่ออินเตอร์เน็ตและอื่น ๆ ได้เหมือนบอร์ด GSM รุ่นใหญ่ ๆ เลย แต่ไม่สามารถคุยได้ เพราะตัดขาลำโพงกับไมค์ออก จึงเหมาะกับงานเฉพาะด้านที่ต้องการความคุ้มค่า การใช้งานไลบารีเหมือน SIM900 มีไลบารีมาให้พร้อมใช้งาน กระแสสูงสุด 5A ถ้าบอร์ด Arduino ที่ใช้ไฟจาก usb อาจจะกระแสไม่พอ ต้องต่อไฟเพิ่ม ทำงานทันทีที่จ่ายไฟ มี LED แสดงผลสัญญาณ ถ้าจับสัญญาณโทรศัพท์ได้จะกระพริบช้า ๆ แต่ถ้าจับไม่ได้จะกระพริบถี่ ๆ บอร์ด SIM800L Module สามารถต่อกับ Battery Li-ion ได้โดยตรง สามารถต่อไฟ 5V ได้โดยตรง
คุณสมบัติ SIM800A development board:
- Power supply requirements: 5V-18V, Current 1.5 A or above is required to provide
- TTL level serial interface is compatible with 3.3V and 5V microcontrollers. directly with 51/STM32/MP430 MCU communication;
- Early computer debugging, recommend use CP2102 USB to TTL module to give module power supply and communication;
- Using single-chip microcomputer control module, also can through the USB--232 monitoring module for instructions and greatly convenient to find the problem,
- Standby at around 30 ma you can set the dormant in about 10 ma, low power consumption.
- Support for SMS, GPRS data transfer, send MMS, DTMF, HTTP, FTP, the PPP dial-up, and other functions.
- At the same time, the hardware contains a reset pin. if Module problems arise, can use this pin reset to solve them.
- Development board support 2G/3G/4G unicom or mobile phone sim card
SIM800A GSM/GPRS Module Development Board Can connect with following :
- USB-TTL Module
- USB-232 Cable
- STC89 singlechip
- STM32F103
- UNO singlechip
- Raspberry Pi