ASAIR Original DHT22 AM2302 Temperature & Humidity Sensor โมดูลวัดอุณหภูมิและความชื้น
DHT22 เป็นโมดูลวัดอุณหภูมิและความชื้นที่ความละเอียดและช่วงการวัดที่สูงกว่า DHT11 ใช้ไฟได้ 3-5V สามารถวัดอุณหภูมิได้ตั้งแต่ -40 ถึง 80°C ที่ความแม่นยำ ±0.5°C และความชื้น 0-100% คลาดเคลื่อน 2-5% อัตราการอ่านค่าอุณหภูมิและความชื้นสูงสุด 0.5Hz โมดูล DHT22 ใช้งานง่าย มีไลบลารี่พร้อมใช้
DHT22 AM2302 Temperature & Humidity Sensor Description:
The DHT22 is a basic, low-cost digital temperature and humidity sensor. It uses a capacitive humidity sensor and a thermistor to measure the surrounding air and spits out a digital signal on the data pin (no analog input pins needed). It's fairly simple to use but requires careful timing to grab data. The only real downside of this sensor is that it can only get new data once every 2 seconds, so when using our library, sensor readings can be up to 2 seconds old.
Connect the first pin on the left to 3-5V power, the second pin to your data input pin, and the right pin to the ground. Although it uses a single wire to send data it is not Dallas One Wire compatible! If you want multiple sensors, each must have its own data pin! We have written an Arduino library with an example code
Compared to the DHT11, this sensor is more precise, more accurate, and works in a bigger range of temperature/humidity, but its larger and more expensive
DHT22 AM2302 Temperature & Humidity Sensor Technical Details:
- 3 to 5V power and I/O
- 2.5mA max current use during conversion (while requesting data)
- Good for 0-100% humidity readings with 2-5% accuracy
- Good for -40 to 80°C temperature readings ±0.5°C accuracy
- No more than 0.5 Hz sampling rate (once every 2 seconds)
- Body size 27mm x 59mm x 13.5mm (1.05" x 2.32" x 0.53")
- 4 pins, 0.1" spacing
- Weight (just the DHT22): 2.4g