รีเลย์ 4 ช่อง สำหรับบอร์ด Arduino 4 Channel Relay Shield for Arduino บอร์ด Arduino Shield Relay 4 ช่อง ขนาด 3A/125VAC หรือ 3A/24VDC ช่องต่อแบบสกรู พร้อมไฟ LED แสดงสถานะ สามารถเสียบลงบนบอร์ด Arduino รองรับ Arduino Uno, Arduino Mega2560 และ Arduino Leonardo รีเลย์ทำงานแบบ Active High
รีเลย์ 4 ช่อง Arduino Shield บอร์ดนี้ใช้งานง่าย ทำงานแบบ Active High โดยจะใช้ขาควบคุมดังนี้
- ขา7 = รีเลย์ตัวที่ 1
- ขา6 = รีเลย์ตัวที่ 2
- ขา5 = รีเลย์ตัวที่ 3
- ขา4 = รีเลย์ตัวที่ 4
This 5V 4 Relay Shield Module is a small current signal control power equipment commonly used electronic module, enabling high-power single-chip control devices are widely used in SCM system to make smart home project; and can be directly plugged into the compatible the use of various types of motherboards, eliminating the patch cable troubles
Relay Shield Interfaces:
- Relay: 5V DC relay, HJR-4102-L-5V, the Relay1 is be behalf of the 1st relay, the same for others.
- Power Interface: 5V DC Power
- Indicator: four lights are red when the relay is driven high , the corresponding indicator will light up.
- Relay Terminals:
- Terminal high-power , high-current high voltage can be connected to the device . The 1st foot ( i.e. NOx) is a normally open pin , NCx pin is normally closed , COMx is common, i.e., when the relay is not driven , NOx and COMx open between two pins , NCx and COMx connection ; When the relay (x) control signal pin is high drive relays , NOx and COMx connection open between NCx and COMx.