XY-LPWM PWM Square Wave Signal Generator W/ Adjustable Frequency and Duty Cycle

XY-LPWM PWM Square Wave Signal Generator W/ Adjustable Frequency and Duty Cycle
XY-LPWM PWM Square Wave Signal Generator W/ Adjustable Frequency and Duty CycleXY-LPWM PWM Square Wave Signal Generator W/ Adjustable Frequency and Duty CycleXY-LPWM PWM Square Wave Signal Generator W/ Adjustable Frequency and Duty Cycle
รหัสสินค้า D97
หมวดหมู่ Pulse Generator
ราคา 95.00 บาท
สถานะสินค้า พร้อมส่ง
ลงสินค้า 24 พ.ย. 2562
อัพเดทล่าสุด 16 ก.พ. 2567
คงเหลือ 14 ชิ้น
จำนวน
ชิ้น
หยิบลงตะกร้า
บัตรประชาชน
บุ๊คแบ๊งค์
คุ้มครองโดย LnwPay

XY-LPWM PWM Square Wave Signal Generator W/ Adjustable Frequency and Duty Cycle

This device is capable of generating square wave signal for experimental development that involves PWM dimming and speed controlling (e.g. motor drivers) as well as other micro controller use. It can be controlled via the Serial Protocol TTL (TXD & RXD pins). It is stable and reliable, and fairly simple to use. 
 
Specification:
  • Operating Voltage: 3.3 - 30 VDC
  • Frequency Range: 1Hz – 150 KHz
  • Frequency Accuracy: the accuracy in each range is about 2%
  • Signal Load Capacity: 5 - 30 mA
  • Output Amplitude: PWM Amplitude Equal to the Supply Voltage
  • Operating Temperature: -20 - +70 Celsius
  • Dimensions: 52 x 32 x 10 mm  

Communication Standard: 
  • 9600 bps Data bits: 8
  • Stop bit: 1
  • Check digit: none
  • Flow control: none 
  • Serial Communication
 
1) Setting the frequency of the PWM: 
     Command "F101": Set the frequency to 101 HZ (001 to 999) 
     Command "F1.05": set the frequency of 1.05 KHZ (1.00 ~ 9.99) 
     Command "F10.5": Set the frequency to 10.5KHZ (10.0 ~ 99.9) 
     Command "F1.0.5": set the frequency of 105KHZ (1.0.0 ~ 1.5.0)
2) Setting the PWM duty cycle: 
     DXXX": set the PWM duty cycle to XXX; (001 ~ 100) 
     Example: “D050”, sets the PWM duty cycle is 50%
3) Read the set parameter 
     Send a "read" string to read the set parameters. 
     Set successfully return: DOWN. 
     Setup failed to return: FALL.

วิธีการชำระเงิน

  1. ชำระเงินค่าสินค้าโดยการโอนเงินเข้าบัญชีด้านล่าง โดยลูกค้าสามารถโอนเงินหลังทำรายการสั่งซื้อได้ทันทีไม่ต้องรอยืนยัน

  2. หลังจากโอนเงินแล้วสามารถแจ้งชำระเงินได้ที่ เมนูแจ้งชำระเงิน


หรือชำระเงินผ่าน PayPal โดยคลิกที่ ชำระเงินออนไลน์

ธนาคารกรุงเทพ จำกัด (มหาชน) สาขามหาวิทยาลัยเกษตรศาสตร์ ออมทรัพย์
บมจ. ธนาคารกสิกรไทย สาขามหาวิทยาลัยเกษตรศาสตร์ ออมทรัพย์
ธนาคารไทยพาณิชย์ จำกัด (มหาชน) สาขามหาวิทยาลัยเกษตรศาสตร์ ออมทรัพย์
บมจ. ธนาคารกรุงไทย สาขามหาวิทยาลัยเกษตรศาสตร์ ออมทรัพย์
ธนาคารทหารไทยธนชาต จำกัด (มหาชน) สาขาME BY TMB ออมทรัพย์
พร้อมเพย์ สาขา- -
Scan this!
ดิศรณ์ ตันติเกตุ
098-xxxxxx-2
Accept All Banks | รับเงินได้จากทุกธนาคาร
  • ค่าธรรมเนียม 3.9% + 11 THB
  • การชำระผ่าน PayPal คุณไม่จำเป็นต้องแจ้งชำระเงิน เนื่องจากระบบจะจัดการให้คุณทันที ที่คุณชำระเงินเสร็จสมบูรณ์

ติดตามร้านของเราผ่านแอพได้แล้ววันนี้
  • พิมพ์ “GenLogic” ในช่อง Search
  • หรือเข้าจากรายการร้านค้าโปรดของฉัน

  • ค้นหา
*ใส่ เบอร์มือถือ หรือ email ที่ใช้ในการสั่งซื้อ

เข้าร่วมร้านค้า Arduino4

ร้านGenLogic
ร้านGenLogic
/www.genlogic.co.th/
Join เป็นสมาชิกร้าน
251
สมัครสมาชิกร้านนี้ เพื่อรับสิทธิพิเศษ

สถิติร้าน Arduino4

หน้าที่เข้าชม1,830,165 ครั้ง
ผู้ชมทั้งหมด799,165 ครั้ง
เปิดร้าน12 ธ.ค. 2558
ร้านค้าอัพเดท8 ก.ย. 2568
รายการสั่งซื้อของฉัน
เข้าสู่ระบบด้วย
เข้าสู่ระบบ
สมัครสมาชิก

ยังไม่มีบัญชีเทพ สร้างบัญชีใหม่ ไม่มีค่าใช้จ่าย
สมัครสมาชิก (ฟรี)
รายการสั่งซื้อของฉัน
ข้อมูลร้านค้านี้
ร้านGenLogic
GenLogic
ขายบอร์ด Arduino และอุปกรณ์อื่นๆ ที่ใช้ร่วมกับ Arduino รวมถึง Microcontroller, Module, Breakout board, Sensor และอุปกรณ์อิเล็กทรอนิกส์ต่างๆ ในราคาถูก เหมาะสำหรับผู้ที่สนใจเกี่ยวกับ Arduino และการโปรแกรมระบบ Microcontroller และอิเล็กทรอนิกส์ทั่วไป และทำโปรเจคต่างๆ ร้านมีสินค้าสต็อกพร้อมจัดส่ง จัดส่งสินค้ารวดเร็วภายใน 1-2 วันทำการเท่านั้น
เบอร์โทร :
อีเมล : sale@genlogic.co.th
ส่งข้อความติดต่อร้าน
เกี่ยวกับร้านค้านี้
สินค้าที่ดูล่าสุด
ดูสินค้าทั้งหมดในร้าน
สินค้าที่ดูล่าสุด
บันทึกเป็นร้านโปรด
Join เป็นสมาชิกร้าน
แชร์หน้านี้
แชร์หน้านี้

TOP เลื่อนขึ้นบนสุด
พูดคุย-สอบถาม